LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 755 (Engine Exhaust System) >> Repair Instructions >> Exhaust Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to JACKING AND LIFTING in General Information.
  2. Remove the exhaust system muffler. Refer to MUFFLER REPLACEMENT   . 
  3. Use a drill in order to remove the rivets at the exhaust muffler heat shield.
  4. Remove the exhaust muffler heat shield from the vehicle.