LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 755 (Engine Exhaust System) >> Repair Instructions >> Exhaust Hanger Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the catalytic converter hanger.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the catalytic converter hanger bolts.

    Tighten 

    Tighten the catalytic converter hanger bolts to 35 N.m (36 lb ft).

  3. Install the catalytic converter hanger insulators to the catalytic converter.
  4. Lower the vehicle.
    Fig 1: Installing Catalytic Converter Hanger
    G01485990Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals