LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 752 (Engine Mechanical) >> Description and Operation >> Crankcase Ventilation System Description >> Functional Check of PCV valve

Functional Check of PCV valve

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

If an engine is idling rough, check for a clogged PCV valve. Replace if required. Use the following procedure:

  1. Remove PCV valve from intake manifold.
  2. Shake valve and listen for the rattle of needle inside the valve.
  3. If valve does not rattle, replace valve.

With this system, any blow-by in excess of the system capacity (from a badly worn engine, sustained heavy load, etc.) is exhausted into the intake manifold and is drawn into the engine.

Proper operation of the crankcase ventilation system is dependent upon a sealed engine. If oil sludging or dilution is noted, and the crankcase ventilation system is functioning properly, check engine for possible cause and correct to ensure that system will function as intended.

scientia non olet · About LEMON Manuals