LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 751 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C1295: Brake Lamp Switch Circuit Open >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

The stop lamp switch input voltage is between 2.2 volts and 5.0 volts for 2 seconds.