Inspection Procedure
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the front tire wear.
- Inspect the rear tire wear.
- Rotate the tires if any of the following conditions exist:
- The amount of time or mileage since the last tire rotation matches the maintenance schedule.
- The outer tread Blocks are worn more than the middle tread Blocks (1).
- The outer tread Blocks are worn more than the inner tread Blocks (2).
- The middle tread Blocks are worn more than the outer tread Blocks (4).
- Measure the wheel alignment if any of the following conditions exist:
- The tread Blocks have feathered edges (3).
- The outer tread Blocks are worn more than the inner tread Blocks (2).
- The inner tread Blocks are worn more than the outer tread Blocks (2).
- Inspect the struts or the shock absorbers if the tire tread exhibits a cupped appearance (3).