Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.
- Tighten the lower control arm mounting nuts (3, 4).
Tighten
- Tighten the nut (3) to 125 N.m (107 lb ft).
- Tighten the nut (4) to 50 N.m (37 lb ft).
- Test drive the vehicle.