LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Instrument Panel (I/P) Air Outlet Ducts Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the tabs of the air distribution extension duct with the slots in the I/P carrier.
    Fig 1: Aligning Air Distribution Extension Duct With Slots In I/P Carrier
    G01482554Courtesy of GENERAL MOTORS CORP.
  2. Rotate the air distribution extension duct to secure the retaining tab to the I/P carrier.
  3. Install the I/P assembly. Refer to INSTRUMENT PANEL (I/P) ASSEMBLY REPLACEMENT  in Instrument Panel, Gages and Console.
    Fig 2: Installing Air Distribution Extension Duct
    G01482555Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals