LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 736 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Bushings Replacement (Vertical) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower control arm. Refer to Lower Control Arm Replacement .
  2. Secure the lower control arm in a vice.
  3. Mark the lower control arm along the flat edge of the bushing flange.
    Fig 1: Marking Lower Control Arm Along Flat Edge Of Bushing Flange
    G01673340Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Apply J 23444-A  (or equivalent high pressure lubricant) to the threads of J 21474-27  .
  4. Assemble the following bushing removal tools as shown:
    1. 4.1. J 21474-27 
    2. 4.2. J 21474-13 
    3. 4.3. J 34126 
    4. 4.4. J 35379 
    5. 4.5. J 21474-2 
    6. 4.6. J 21474-4 
  5. Tighten J 21474-4  .
  6. Disassemble the bushing removal tools.
    Fig 2: Identifying Bushing Removal Tools
    G01673341Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals