LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix and 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the windshield pillar garnish molding to the windshield pillar.
  2. Install the windshield garnish molding, pressing into place until the retainer clips are fully seated.
  3. Press the door weatherstrip back onto the windshield pinchweld flange.
    Fig 1: Installing Windshield Pillar Garnish Molding To Vehicle
    G01504501Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals