LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 731 (Seat System) >> Repair Instructions >> Seat Back Pad Replacement - Rear (Non Folding) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat pad on the frame.
  2. Install the rear seat back cover to the rear seat back pad. Refer to SEAT BACK COVER REPLACEMENT - REAR  .
  3. Install the rear seat back. Refer to SEAT BACK REPLACEMENT - REAR (STATIONARY)  or SEAT BACK REPLACEMENT - REAR (FOLDING)  .
    Fig 1: Installing Rear Seat Back Pad To Frame
    G01504466Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals