LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 731 (Seat System) >> Repair Instructions >> Seat Adjuster Replacement - Front (Two-Way Manual) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat from the vehicle. Refer to SEAT REPLACEMENT - FRONT BUCKET  .
  2. Remove the front seat trim panel. Refer to TRIM PANEL REPLACEMENT - FRONT SEAT  .
  3. Remove the J-hooks from the seat cushion trim cover.
  4. Position the seat back to the full down position.
  5. Fold back the seat cushion pad and trim cover to access the adjuster bolts.
  6. Remove the cross brace to adjuster bolts.
  7. Remove the adjuster from the seat cushion frame.
  8. Remove the adjuster crosswire and assist springs.
  9. Remove the E/Z entry cable from the adjuster, if equipped.
  10. Separate the left and the right adjusters by removing the cross brace bolts.
    Fig 1: Removing Front Seat Adjuster Crosswire And Assist Springs
    G01504389Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals