LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 714 (Lighting Systems) >> Repair Instructions >> Hazard and Turn Signal Flasher Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left instrument panel (IP) insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in Instrument Panel, Gages and Console.
  2. Remove the steering column filler panel. Refer to STEERING COLUMN FILLER REPLACEMENT in Instrument Panel, Gages and Console.
  3. Slide the hazard and turn signal flasher to the right, releasing the tabs from the Body Control Module (BCM) bracket.
  4. Disconnect the electrical connector from the hazard and turn signal flasher.
    Fig 1: Disconnecting Electrical Connector From Hazard And Turn Signal Flasher
    G01503214Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals