LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Cord Replacement (3.8L) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the coolant heater cord retainer from the upper radiator support.
  2. Cut the coolant heater cord straps at the engine wiring harness.
  3. Disconnect the coolant heater cord from the coolant heater.
  4. Remove the coolant heater cord from the vehicle.
    Fig 1: Disconnecting Coolant Heater Cord From Coolant Heater (3.8L)
    G02084110Courtesy of GENERAL MOTORS CORP.