LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement - Supercharger >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive belt tensioner.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the drive belt tensioner nut.

    Tighten 

    Tighten the nut to 50 N.m (37 lb ft).

    Fig 1: Installing Drive Belt Tensioner
    G02083431Courtesy of GENERAL MOTORS CORP.
  3. Install the supercharger drive belt. Refer to DRIVE BELT REPLACEMENT (L36)  or DRIVE BELT REPLACEMENT (L67)  .
    Fig 2: Installing Supercharger Drive Belt
    G02083432Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals