LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement (L67) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift or rotate the drive belt tensioner using a 15 mm box end wrench on the pulley nut.
  2. Install the drive belt.
    Fig 1: Drive Belt Routing
    G02083424Courtesy of GENERAL MOTORS CORP.
  3. Lift or rotate the supercharger drive belt tensioner using a 15 mm box end wrench on the pulley nut.
  4. Install the supercharger drive belt.
    Fig 2: Installing Supercharger Drive Belt
    G02083426Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals