LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Idler Pulley Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the supercharger drive belt. Refer to DRIVE BELT REPLACEMENT (L36)  or DRIVE BELT REPLACEMENT (L67)  .
    Fig 1: Removing Supercharger Drive Belt
    G02083441Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt idler pulley bolt.
  3. Remove the drive belt idler pulley.
    Fig 2: Removing Drive Belt Idler Pulley
    G02083442Courtesy of GENERAL MOTORS CORP.
  4. Remove the idler pulley bracket bolts.
  5. Remove the idler pulley bracket.
    Fig 3: Removing Idler Pulley Bracket
    G02083443Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals