LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Balance Shaft Bearing and/or Bushing Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

J 36995  Balance Shaft Bearing Remover/Installer

  1. Use J 36995  to remove the balance shaft bearing.
  2. Use J 36995  to remove the balance shaft bushing. It may take a considerable amount of force to loosen the bushing from the block bore.
    Fig 1: Removing Balance Shaft Bearing
    G02083806Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals