LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Engine Mechanical - 3.1L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement - Upper Radiator Support >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine mount strut from the engine mount strut bracket at the upper radiator support. Refer to ENGINE MOUNT STRUT REPLACEMENT  .
    Fig 1: Removing Engine Mount Strut From Engine Mount Strut Bracket
    G02081354Courtesy of GENERAL MOTORS CORP.
  2. Remove the horizontal engine mount strut bracket bolt from the engine mount strut bracket.
  3. Remove the vertical engine mount strut bracket bolts from the engine mount strut bracket.
  4. Remove the engine mount strut bracket from the upper radiator support.
    Fig 2: Removing Engine Mount Strut Bracket From Upper Radiator Support
    G02081355Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals