Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to JACKING AND LIFTING in General Information.
- Drain the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM in Engine Cooling.
- Drain the engine oil. Refer to ENGINE OIL AND OIL FILTER REPLACEMENT .
- Lower the vehicle.
- Remove the lower intake manifold. Refer to INTAKE MANIFOLD REPLACEMENT - LOWER .
- Remove the valve rocker arms and the pushrods. Refer to VALVE ROCKER ARM AND PUSH ROD REPLACEMENT .
- Remove the exhaust crossover pipe. Refer to EXHAUST CROSSOVER PIPE REPLACEMENT (3.1 L) in Engine Exhaust.
- Remove the right engine mount strut bracket. Refer to ENGINE MOUNT STRUT BRACKET REPLACEMENT - RIGHT .
- Remove the oil level indicator tube. Refer to OIL LEVEL INDICATOR AND TUBE REPLACEMENT .
- Remove the left spark plug wires from the spark plugs. Refer to SPARK PLUGS in Engine Performance - Removal and Installation.
- Remove the left spark plugs. Refer to SPARK PLUGS in Engine Performance - Removal and Installation.
- Remove the left exhaust manifold. Refer to EXHAUST MANIFOLD REPLACEMENT - LEFT (3.1L) in Engine Exhaust.
- Remove the left cylinder head bolts and discard the bolts.
- Remove the left cylinder head.
- Remove the left cylinder head gasket.
- Clean and inspect the left cylinder head and the gasket mating surfaces. Refer to CYLINDER HEAD CLEANING AND INSPECTION .