LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 700 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement (3.1L) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory drive belt. Refer to DRIVE BELT REPLACEMENT .
  2. Remove the BEC for tool clearance. Refer to UNDERHOOD FUSE BLOCK in Wiring Systems.
  3. Using J 37609-A  remove the power steering pump pulley from the power steering pump.
    Fig 1: Removing Power Steering Pump Pulley
    G01489998Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals