LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Controls - Self-Diagnostics - 3.5L) >> Diagnostic Tests >> DTC P1441: EVAP Emission System Flow During Non-Purge >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

This DTC tests for undesired intake manifold vacuum flow to Evaporative (EVAP) emission system. The Powertrain Control Module (PCM) seals the EVAP system by commanding EVAP canister purge valve off and EVAP canister vent valve on. The PCM monitors Fuel Tank Pressure (FTP) sensor to determine if a vacuum is being drawn on the EVAP system. If vacuum in the EVAP system is more than a predetermined value within a predetermined time, DTC P1441 will set.