LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 681 (Body Rear End) >> Repair Instructions >> Latch Bracket Replacement - Rear Lift Window Panel >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear compartment lift window.
  2. Remove the rear floor side stowage compartment cover.
  3. Remove the rear/end corner carpet trim panel. Refer to TRIM PANEL CARPET REPLACEMENT - REAR CORNER (COUPE) or TRIM PANEL CARPET REPLACEMENT - REAR CORNER (CONVERTIBLE) or TRIM PANEL CARPET REPLACEMENT - REAR CORNER (HARDTOP) in Interior Trim.
    Fig 1: Rear/End Corner Carpet Trim Panel
    G01452061Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical harness.

    Remove the taillamps (for access to latch bracket nuts).

  5. Remove the nuts attaching the latch bracket.
  6. Remove the latch bracket with latch.
    Fig 2: Removing Latch Bracket With Latch
    G01452062Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals