Removal Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front and center side weatherstrip from the retainer. Refer to WEATHERSTRIP REPLACEMENT - FOLDING TOP (FRONT AND CENTER SIDE RAILS) or WEATHERSTRIP REPLACEMENT - FOLDING TOP (REAR SIDE RAIL) or WEATHERSTRIP REPLACEMENT - FOLDING TOP (NUMBER FIVE BOW) .
- Remove the screws from the side weatherstrip retainer.
- Remove the retainer.
- Pull the window blowout clip from the front side retainer.
- Clean the adhesive from the blowout clip using 3M™ P/N 8984 or equivalent.