LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 678 (Folding Top System) >> Repair Instructions >> Folding Top Stowage Compartment Lid Switch Replace >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the harness (2) to the lid release switch.
  2. Align the electrical harness to the slot in the rear compartment lid.
  3. Install the lid release switch to the rear compartment lid, pressing until fully seated.
  4. Check for the proper operation of the lid switch.
  5. Position the folding top to the original position.
    Fig 1: Connecting Harness To Lid Release Switch
    G01451325Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals