Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Rivet the stay pad to the #1 bow.
Staple the stay pad to the #4 bow.
Staple the stay pad to the #2 and 3 bows.

Fig 1: Stapling Stay Pad
Courtesy of GENERAL MOTORS CORP.
Position the #5 bow in the up position.

Fig 2: Positioning #5 Bow In Up Position
Courtesy of GENERAL MOTORS CORP.
Staple the stay pad to the #5 bow.
Install the folding top cover. Refer to FOLDING TOP COVER REPLACEMENT .
Remove the protective cover from the stowage compartment lid.

Fig 3: Stapling Stay Pad To #5 Bow
Courtesy of GENERAL MOTORS CORP.