LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 678 (Folding Top System) >> Repair Instructions >> Folding Top Seal Compression Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws from the front side rail seal on the #1 bow.
    Fig 1: Screws From Front Side Rail Seal On #1 Bow
    G01451466Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws from the seal compression panel on the #1 bow.
    Fig 2: Screws From Seal Compression Panel On #1 Bow
    G01451467Courtesy of GENERAL MOTORS CORP.
  3. Remove the panel.
    Fig 3: Panel
    G01451468Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals