Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Install the #3 bow to the main control link bracket.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the #3 bow screws to the main control link bracket (3).
Tighten

Tighten roof bow to the main control link bracket screws to 13 N.m (10 lb ft).

Fig 1: #3 Bow To Main Control Link Bracket
Courtesy of GENERAL MOTORS CORP.
Staple the stay pad to the #3 bow (3).
Install the headliner screws to the #3 bow.
Tighten

Tighten the headliner screws to 2 N.m (18 lb in).
Refer to FOLDING TOP ROOF BOW REPLACEMENT (NUMBER 1 BOW) or FOLDING TOP ROOF BOW REPLACEMENT (NUMBER 2 BOW) or FOLDING TOP ROOF BOW REPLACEMENT (NUMBER 3 BOW) or FOLDING TOP ROOF BOW REPLACEMENT (NUMBER 4 BOW) or FOLDING TOP ROOF BOW REPLACEMENT (NUMBER 5 BOW) .

Fig 2: Stapling Stay Pad To #3 Bow
Courtesy of GENERAL MOTORS CORP.