LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 669 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Lens Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the instrument panel cluster (IPC) lens into position on the IPC.
    1. Align the lens locking tabs into the slots.
    2. Align the lens onto the alignment pins.
  2. Install the IPC lens locking tabs to seat the lens.
  3. Install the I/P cluster bezel. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER .
  4. Install the IPC to the vehicle. Refer to INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT .
    Fig 1: Installing Instrument Panel Cluster Lens
    G01453986Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals