LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 669 (Instrument Panel, Gages, And Console) >> Diagnostic Information and Procedures >> Diagnostic Trouble Code (DTC) Displaying >> Entering On-Board Diagnostics

Entering On-Board Diagnostics

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

To enter the Diagnostic Display function perform the following steps:

  1. Turn ON the ignition switch, with the engine OFF.
  2. Press the RESET button to acknowledge any warning messages present.
  3. Press the OPTIONS button on the Driver Information Center (DIC) and hold.
  4. While holding the OPTIONS button press the FUEL button 4 times within a 5 second period.
  5. System will first enter automatic display mode followed by the manual display mode.
scientia non olet · About LEMON Manuals