Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the transmission fluid temperature sensor.
Tighten

Tighten the transmission fluid temperature sensor to 27 N.m (20 lb ft).

Fig 1: Transmission Fluid Temperature Sensor
Courtesy of GENERAL MOTORS CORP.
Connect the transmission fluid temperature sensor electrical connector.
Lower the vehicle.

Fig 2: Connecting Transmission Fluid Temperature Sensor Electrical Connector
Courtesy of GENERAL MOTORS CORP.