LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Engine Mechanical - 5.7L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Rear Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine flywheel. Refer to ENGINE FLYWHEEL REPLACEMENT  .
  2. Remove the oil pan-to-rear cover bolts (1).
    Fig 1: Removing Oil Pan-To-Rear Cover Bolts
    G01970550Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear cover bolts.
    Fig 2: Removing Engine Rear Cover
    G01970551Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear cover and gasket.
  5. Discard the rear cover gasket.
  6. Clean and inspect the engine rear cover. Refer to ENGINE REAR COVER CLEANING AND INSPECTION .
scientia non olet · About LEMON Manuals