Finish Damage Evaluation Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Important:
- If the wheels are chrome-plated, do not re-plate or refinish the wheels.
- If the wheels are polished aluminum, do not refinish the wheels in the dealer environment. Utilize a refinisher that meets manufacturer guidelines.
- Inspect the wheels for damage from uncoated wheel balance weights or from automatic car wash facilities.
- Inspect the wheels for the following conditions:
- Corrosion
- Scrapes
- Gouges
- Verify the damage is not deeper than what sanding can remove.
- Inspect the wheels for cracks. If a wheel has cracks, discard the wheel.
- Inspect the wheels for bent rim flanges. If a rim flange is bent, discard the wheel.