LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Clutch Coil Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor from the vehicle.
  2. Clamp the J 41790  in a vise and attach the A/C compressor to the J 41790  .
    Fig 1: Attaching A/C Compressor To J 41790
    G01418502Courtesy of GENERAL MOTORS CORP.
  3. Remove the A/C compressor clutch plate and hub assembly. Refer to COMPRESSOR CLUTCH PLATE AND HUB ASSEMBLY REMOVAL (V7 - DIRECT MOUNT)  .
  4. Install the J 33023-A  onto the front head of the A/C compressor.
  5. Remove the A/C compressor rotor and bearing assembly. Refer to CLUTCH ROTOR AND/OR BEARING REMOVAL (V7 - DIRECT MOUNT)  .
    Fig 2: Installing J 33023 Onto Front Head Of A/C Compressor
    G01418503Courtesy of GENERAL MOTORS CORP.
  6. Mark the clutch coil terminal location (2) on the A/C compressor front head.
  7. Install the J 33025  onto the J 8433  .
  8. Install the J 8433  onto the A/C compressor clutch coil (1) and tighten the puller leg bolts.
  9. Tighten the center forcing screw J 8433-3  of the J 8433  against the J 33023-A  to remove the A/C compressor clutch coil from the A/C compressor.
  10. Remove the J 8433-3  , the J 33023-A  , the J 33025  and the J 8433  .
Fig 3: Installing J 8433 Onto A/C Compressor Clutch Coil
G01418504Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals