LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Air Outlet Replacement - Passenger >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P upper trim pad. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER in Instrument Panel, Gages and Console.
  2. Remove the screws retaining the air distribution duct to the underside of the upper trim pad.
  3. Remove the air distribution duct.
    Fig 1: Removing Air Distribution Duct
    G01418712Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws retaining the passenger air outlet to the underside of the trim pad.
  5. Remove the air outlet.
    Fig 2: Removing Air Outlet
    G01418713Courtesy of GENERAL MOTORS CORP.