LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Engine Mechanical (Repair Instructions 3 Of 5) - 3.6L (Ly7)) >> Repair Instructions (Off-Vehicle Repair Instructions - Part 2) >> Engine Front Cover Disassemble >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Front Oil Seal
    GM1408419Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft front oil seal from the engine front cover using the J 45000  .
  2. Fig 2: Locating Camshaft Position Actuator Valve Oil Seals
    GM1408421Courtesy of GENERAL MOTORS CORP.
  3. Remove the camshaft position actuator valve oil seals from the engine front cover.
  4. Fig 3: Identifying Water Pump Seal
    GM1211002Courtesy of GENERAL MOTORS CORP.
  5. Remove the water pump seal from the engine front cover.
  6. Discard the water pump seal.