Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the outlet heater hose.
- Connect the hose to the heater core.
- Use J 38185 to connect the heater hose clamp.
- Connect the outlet heater hose to the outlet heater pipe.
- Connect the vacuum hose to the brake booster.
- Install the wiper motor module assembly. Refer to Wiper Motor Module Replacement in Wipers/Washer Systems.
- Fill the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.