LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 624 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Defogger Outlet Duct Replacement - Side Window (w/ UV6) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Side Window Defogger Ducts
    GM318081Courtesy of GENERAL MOTORS CORP.
  1. Align the side window defogger ducts onto the defroster duct and snap the ducts into place.
  2. Align the side window defogger ducts and snap the ducts into the I/P carrier.
    3. Fig 2: Locating Heads Up Display Module Mounting Bolts
    GM655942Courtesy of GENERAL MOTORS CORP.
  3. Install the heads up display module.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the bolts that secure the heads up display module to the I/P.

    Tighten:  Tighten the bolts to 2 N.m (18 lb in).

  5. Connect the heads up display module electrical connector.
  6. Install the I/P assembly. Refer to Instrument Panel (I/P) Assembly Replacement in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals