Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Use a small hammer and a flat-bladed tool and tap down on the transaxle vent seat in order to install the transaxle vent (37).
- Install the air inlet duct. Refer to the appropriate service information.
- Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.4L.
- Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.6L (LY7).