LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Right Front (Pontiac) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the seat belt guide loop cover.
    2. Fig 1: Locating Seat Belt Guide Loop
    GM620836Courtesy of GENERAL MOTORS CORP.
  2. Remove the nut from guide loop.
  3. Remove the seat belt guide loop from the guide adjuster bracket.
  4. Remove the center pillar lower trim. Refer to Trim Panel Replacement - Lower Center Pillar in Interior Trim.
  5. Remove the bolts from the seat belt intermediate guide.
  6. Remove the seat belt intermediate guide from the center pillar.
  7. Remove the seat belt retractor bolt.
  8. Remove the seat belt retractor from the center pillar.
    9. Fig 2: View Of Seat Belt Retractor Bolt
    GM620831Courtesy of GENERAL MOTORS CORP.
  9. Remove the anchor plate nut from the front seat stud.
  10. Remove the anchor plate from the front seat stud.
scientia non olet · About LEMON Manuals