Removal procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to Brake Fluid Irritant Caution in Cautions and Notices.

NOTE: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Cautions and Notices.

Fig 1: View Of Master Cylinder Reservoir

Courtesy of GENERAL MOTORS CORP.

Disconnect brake pipes from the master cylinder.
Disconnect fluid level sensor electrical connector.
Remove master cylinder mounting nuts.
Remove the master cylinder.
Drain the master cylinder reservoir of all brake fluid.
Remove the master cylinder reservoir. Refer to Master Cylinder Reservoir Replacement .