LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Engine Mechanical (Repair Instructions 2 Of 5) - 3.6L (Ly7)) >> Repair Instructions (On-Vehicle Part 2 & Off-Vehicle Part 1) >> On-Vehicle Repair Instructions - Part 2 >> Oil Pan Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the oil pan as necessary. Refer to Oil Pan Assemble .
  2. Fig 1: Locating Oil Pan
    GM1394086Courtesy of GENERAL MOTORS CORP.
  3. Install the oil pan. Refer to Oil Pan Installation .
  4. Install the engine front cover. Refer to Engine Front Cover Replacement .
  5. Install the A/C compressor with the hoses to the engine. Refer to Air Conditioning (A/C) Compressor Installation .
  6. Install the engine to the transmission and frame and install the assembled powertrain module to the vehicle. Refer to Engine Replacement .