Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Use a utility stand in order to slightly compress the coil spring and relieve the tension on the shock absorber.
- If the vehicle is equipped with automatic level control, disconnect the air tube connector from the shock absorber.
- Remove the shock absorber upper bolt and nut.
- Remove the shock absorber lower bolt and nut.
- Remove the shock absorber.