LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Rear Drive Axle) >> Repair Instructions >> Vent Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Differential Vent Hose Assembly
    GM630655Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the vent hose clamp (2) from the vent hose (1).
  3. Release the grommet securing the vent hose to the vehicle underbody.
  4. Remove the vent hose from the differential assembly vent tube by carefully twisting the hose.
scientia non olet · About LEMON Manuals