Vehicle Speed Sensor: Removal
WARNING: This page is about a different car, the 2002 Cadillac Seville, 2002 Cadillac Eldorado, and 2002 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
Raise the vehicle. Remove the bolts securing the front transaxle brace to the transaxle and right cylinder head. See appropriate REMOVAL & INSTALLATION article. Remove the electrical connector at the vehicle speed sensor. Remove the retaining bolt (131) and the sensor (130). See Fig 1 . Twisting the sensor while pulling outward will aid in removal.