Vehicle Speed Sensor: Installation
WARNING: This page is about a different car, the 2002 Cadillac Seville, 2002 Cadillac Eldorado, and 2002 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
Install the vehicle speed sensor (130) and the retaining bolt (131). See Figure . Install a new O-ring seal on sensor if necessary. Tighten the bolt to specification. See TORQUE SPECIFICATIONS . Install the electrical connector at the sensor. Install the bolts securing the front transaxle brace to the transaxle and right cylinder head. See appropriate REMOVAL & INSTALLATION article. Lower the vehicle.