Removal (Eldorado)

WARNING: This page is about a different car, the 2002 Cadillac Seville, 2002 Cadillac Eldorado, and 2002 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cable end cap from the transmission park/neutral position switch lever. Remove the cable from the bracket by prying on the lock button to the unlocked position. See Fig 1 .
Remove the left closeout insulator panel. See appropriate SHIFT INTERLOCK SYSTEMS article in AUTOMATIC TRANSMISSIONS. Remove the console center trim panel. Remove the shift control cable from the floor shift assembly. See Fig 2 . Remove the cable from the vehicle. See Fig 3 .

Fig 1: Removing & Installing Shift (At Shift Lever)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Identifying Shift Cable Routing

Courtesy of GENERAL MOTORS CORP.

Fig 3: Locating Shift Cable Grommet

Courtesy of GENERAL MOTORS CORP.