Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the throttle body air inlet duct. Refer to Air Cleaner Intake Duct Replacement in Engine Controls - 3.4L.
- Drain the engine coolant from the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
- Remove the right engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement - Right in Engine Mechanical - 3.4 L.
- Disconnect the inlet radiator hose from the engine. Refer to Radiator Hose Replacement - Inlet (LA1) or Radiator Hose Replacement - Inlet (LY7) in Engine Cooling.
- Remove the thermostat bypass pipe. Refer to Thermostat Bypass Pipes Replacement in Engine Cooling.
- Remove the exhaust crossover pipe. Refer to Exhaust Crossover Pipe Replacement (LA1) or Exhaust Crossover Pipe Replacement (LY7) .
- Remove the exhaust manifold heat shield bolts.
- Remove the exhaust manifold heat shield.
- Remove the exhaust manifold nuts.
- Remove the exhaust manifold.
- Remove the exhaust manifold gasket.
- Clean the engine left side exhaust manifold to the engine left side cylinder head sealing surfaces. Refer to Exhaust Manifold Cleaning and Inspection in Engine Mechanical 3.4L Unit Repair.