LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Engine Mechanical - 3.4L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Valve Rocker Arm and Push Rod Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Valve Rocker Arm
    GM54392Courtesy of GENERAL MOTORS CORP.
  1. Install the pushrod(s) and the valve rocker arm(s). Refer to Valve Rocker Arm and Push Rod Installation  in the Engine Unit Repair Manual.
  2. Install the valve rocker arm cover(s). Refer to Valve Rocker Arm Cover Replacement - Left .