LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Engine Mechanical - 3.4L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Balancer Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Crankshaft Washer & Bolt
    GM187039Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft balancer retaining bolt and washer.
    2. Fig 2: Identifying J 24420-C
    GM347334Courtesy of GENERAL MOTORS CORP.
  2. Remove the crankshaft balancer using the J 24420-C  . See Special Tools and Equipment .
scientia non olet · About LEMON Manuals