LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Engine Mechanical - 3.4L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Camshaft Bearing Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Camshaft Bearing Service Set
    GM622704Courtesy of GENERAL MOTORS CORP.
  1. Select the expander assembly and driving washer.
  2. Assemble the J 33049 .
  3. Fig 2: Removing/Installation Camshaft Inner Bearing Using J 33049
    GM4985Courtesy of GENERAL MOTORS CORP.
  4. Drive out the camshaft bearings. Use the J 33049 .